The FullForce™ 10 Speed plugs into your OBD2 port and does two jobs: it keeps DFM from shutting cylinders off, and it turns auto start stop off every time you start the truck. It is not a tune and it doesn't reprogram the factory computer, the transmission's included. Unplug it and the truck is stock again. Below are the questions every buyer should ask, starting with the one most people skip.
1. What does it do to my 10 speed transmission?
1. What does it do to my 10 speed transmission?
Nothing gets reprogrammed. FullForce™ 10 Speed is not a tune and doesn't rewrite the factory computer, the transmission's included. It works through the OBD2 port under the dash, keeps DFM from switching cylinders off, and turns auto stop off at every start. Take it out and the truck is back to stock. What you'll feel is the cylinder switching gone and an engine that keeps idling at stops. We won't promise how your specific truck will shift, because no honest seller can.
2. Why does DFM matter to the transmission at all?
2. Why does DFM matter to the transmission at all?
Your 10 speed takes its cues from the engine the whole time you drive: how much torque you're asking for, how much is arriving, how fast that's changing. DFM keeps changing that picture. It can shut off any of your 8 cylinders in 17 different patterns, and it decides about 80 times a second. Each change is something the transmission has to work around. That's why anything that stops DFM should be able to tell you exactly how it does it.
3. Is it a tune in disguise?
3. Is it a tune in disguise?
No. A tune writes new software over your truck's factory software. Some tunes are excellent, but how your truck drives then depends on the tuner's file, and going back means keeping the stock file safe. FullForce™ 10 Speed doesn't flash, tune or reprogram anything. If you want more power, a tune might be your answer. If you only want DFM and auto stop gone, a plug is the lighter touch.
4. Does it handle auto stop too, or only DFM?
4. Does it handle auto stop too, or only DFM?
Both. The factory A button resets every time you start the truck, so auto stop is back on at the first red light. FullForce™ 10 Speed switches it off for you at every start, so the engine keeps running at lights and you never reach for that button again. Some cheaper plugs only handle DFM and leave auto stop on. Check which one you're looking at before you compare prices.
5. How hard is it to install?
5. How hard is it to install?
It plugs into the OBD2 port, low on the driver's side under the dash. Under 2 minutes, no tools, no trim panels, nothing behind the wheel well liner. Plug it in, start the truck, drive. The first red light tells you it's working: the engine stays on and you didn't touch the button.
6. What happens the day I unplug it?
6. What happens the day I unplug it?
The truck goes back to factory behavior: DFM back on, auto stop back on at every start. Nothing was rewritten, so there's nothing to undo. If you want, unplug it before a dealer visit and plug it back in on the way home.
7. What won't it do, and will it fit my truck?
7. What won't it do, and will it fit my truck?
It won't fix an engine that already ticks. It keeps a healthy engine from switching from here on, so a tick needs a shop first. With all 8 cylinders working, plan on a small mpg drop that most owners call minor. It fits the 2022.5 to 2026 Silverado and Sierra 1500 and the 2021 to 2024 Tahoe, Suburban, Yukon and Yukon XL with the 5.3 or 6.2. A 2022 Silverado 1500 LTD or Sierra 1500 Limited is the older body and takes our V8 & V6 module instead. Every unit has a 60 day money back guarantee and a lifetime warranty.
Fitment check
Select your make, model and year, we'll check it against our full compatibility list instantly.
Don't see your vehicle? Message us, and you're always covered by our returns policy.
How To Get The Best Results With FullForce™ 10 Speed!
Get ready to protect your engine with the authentic FullForce™ 10 Speed, built for GM's 10 speed trucks and SUVs.
Our early Black Friday price is 33% off, $139.99 instead of $209.99, plus free shipping on all orders.
Order your FullForce™ 10 Speed online today, and ask it the transmission question first. Our answer is above.
Plug it into your OBD2 port under the dash. No tools required.
Start your truck and drive. DFM stays off and auto start stop stays off, every start.
Get yours today